‘A Gentle Whisper in Your Ear’

New EU Construction Product Regulation 305/2011 – Halleluiah !

2011-09-13:  Closely related to our current discussions about the 10th Anniversary of the 9-11 WTC Incident in New York …

For more years than I care to remember … I have been involved, directly and/or indirectly, with piecing together the edifice that is European Union (EU) Council Directive 89/106/EEC Interpretation … a lumbering giant which has failed, miserably, to bring about the necessary conditions for the efficient operation of an effective European Economic Area (EEA) Single Market for Construction Products.

Proper Implementation has always been the fatal weakness of this ‘system’ … because on the ground, in Europe, no such Single Market exists in reality.  Politicians, at both European and national levels and typically lacking a competence on technical issues, believe otherwise.  Bureaucrats, at both European and national levels and always lacking a working familiarity with the full scope of EU Treaties, do not want to recognise this fundamental truth.

To refresh your memories … the full title of the now Repealed EU Directive 89/106/EEC was …

Council Directive, of 21 December 1988, on the Approximation of Laws, Regulations and Administrative Provisions of the Member States relating to Construction Products

ANNEX I of that Directive described 6 ‘Essential Requirements’ …

1. Mechanical Resistance & Stability
2. Safety in Case of Fire
3. Hygiene, Health & the Environment
4. Safety in Use
5. Protection against Noise
6. Energy Economy & Heat Retention

The unusual feature of this particular New Approach Directive was that the ‘suitable’ construction products, i.e. products which could be shown to be fit for their intended use, had to facilitate the construction works in satisfying all of the 6 Essential Requirements, taken together as a whole … not just some of the Requirements.

Down through the years, however, it has been deeply frustrating … to have to pressure the TÜV Organization in Germany, for example, to issue proper Test Reports to their German Clients … or, as recently as last July, to have to explain basic information about CE Marking to Manufacturers.  And there appears to be no proper infrastructure in any EU Member State to check and control CE Marks on industrial products generally, never mind construction products.

Further up the chain, there were also problems.  In developing a family of 6 Separate Interpretative Documents for each of the Essential Requirements … important cross linking concepts between Requirements, e.g. Fire-Induced Progressive Building Collapse, fell into a deep void, almost never to be heard from again.  And concepts explicitly referenced in ANNEX I, such as the Safety of Rescue Teams (i.e. firefighters), received little or no attention in those Interpretative Documents … which then had a serious knock-on effect when Harmonized European Standards, European Technical Approvals (ETA’s) and EuroCodes were being drafted, based on the guidelines in Interpretative Documents.

.

.

Halleluiah !   At Long Last … published on 4th April 2011, in the Official Journal of the European Union … the new EU Construction Product Regulation 305/2011 … the full title of which is …

Regulation (EU) No. 305/2011 of the European Parliament and of the Council, of 9 March 2011, laying down Harmonized Conditions for the Marketing of Construction Products and Repealing Council Directive 89/106/EEC

ANNEX I of these New Regulations now describe 7 ‘Basic Requirements for Construction Works’ … requirements which are appropriate to the needs of our time.  Please note the newly revised/additional texts, highlighted in red …

Construction works as a whole and in their separate parts must be fit for their intended use, taking into account in particular the health and safety of persons involved throughout the life cycle of the works.  Subject to normal maintenance, construction works must satisfy these basic requirements for construction works for an economically reasonable working life.

     1. Mechanical Resistance and Stability

The construction works must be designed and built in such a way that the loadings that are liable to act on them during their construction and use will not lead to any of the following:

(a)   collapse of the whole or part of the works ;

(b)   major deformations to an inadmissible degree ;

(c)   damage to other parts of the construction works or to fittings or installed equipment as a result of major deformation of the load-bearing construction ;

(d)   damage by an event to an extent disproportionate to the original cause.

     2. Safety in Case of Fire

The construction works must be designed and built in such a way that in the event of an outbreak of fire:

(a)   the load-bearing capacity of the construction works can be assumed for a specific period of time ;

(b)   the generation and spread of fire and smoke within the construction works are limited ;

(c)   the spread of fire to neighbouring construction works is limited ;

(d)   occupants can leave the construction works or be rescued by other means ;

(e)   the safety of rescue teams is taken into consideration.

     3. Hygiene, Health and the Environment

The construction works must be designed and built in such a way that they will, throughout their life cycle, not be a threat to the hygiene or health and safety of workers, occupants or neighbours, nor have an exceedingly high impact, over their entire life cycle, on the environmental quality or on the climate during their construction, use and demolition, in particular as a result of any of the following:

(a)   the giving-off of toxic gas ;

(b)   the emission of dangerous substances, volatile organic compounds (VOC’s), greenhouse gases or dangerous particles into indoor or outdoor air ;

(c)   the emission of dangerous radiation ;

(d)   the release of dangerous substances into ground water, marine waters, surface waters or soil ;

(e)   the release of dangerous substances into drinking water, or substances which have an otherwise negative impact on drinking water ;

(f)    faulty discharge of waste water, emission of flue gases or faulty disposal of solid or liquid waste ;

(g)   dampness in parts of the construction works or on surfaces within the construction works.

     4. Safety and Accessibility in Use

The construction works must be designed and built in such a way that they do not present unacceptable risks of accidents or damage in service or in operation such as slipping, falling, collision, burns, electrocution, injury from explosion and burglaries.  In particular, construction works must be designed and built taking into consideration accessibility and use for disabled persons.

     5. Protection against Noise

The construction works must be designed and built in such a way that noise perceived by the occupants or people nearby is kept to a level that will not threaten their health and will allow them to sleep, rest and work in satisfactory conditions.

     6. Energy Economy and Heat Retention

The construction works and their heating, cooling, lighting and ventilation installations must be designed and built in such a way that the amount of energy they require in use shall be low, when account is taken of the occupants and of the climatic conditions of the location.  Construction works must also be energy-efficient, using as little energy as possible during their construction and dismantling.

     7. Sustainable Use of Natural Resources

The construction works must be designed, built and demolished in such a way that the use of natural resources is sustainable and in particular ensure the following:

(a)   re-use or recyclability of the construction works, their materials and parts after demolition ;

(b)   durability of the construction works ;

(c)   use of environmentally compatible raw and secondary materials in the construction works.

.

I will be anxious to see if the full intent of these ‘Basic Requirements for Construction Works’ is properly transposed into the new interpretative framework (comprising Delegated Acts, Harmonized Standards, etc., etc.) of EU Regulation 305/2011 …

and …

I will be even more anxious to see how and when specific output (Harmonized Standards, European Technical Approvals (ETA’s) and EuroCodes) from the obsolete interpretative framework of the Repealed Directive 89/106/EEC is revised and updated !

and, finally …

When will we ever see the vital Infrastructure of Implementation operating successfully in the EU Member States … so that Manufacturers can reap the enormous benefits of an effective EEA Single Market for Construction Products ??

.

.

END

Tags: 'suitable' construction products i.e. products which could be shown to be fit for their intended use, 1. Mechanical Resistance and Stability, 2. Safety in Case of Fire, 3. Hygiene Health and the Environment, 4. Safety and Accessibility in Use, 5. Protection against Noise, 6 Separate Interpretative Documents, 6. Energy Economy and Heat Retention, 7. Sustainable Use of Natural Resources, a lumbering giant which has failed miserably to bring about the necessary conditions for the efficient operation, Accessibility of buildings for people with disabilities, an effective European Economic Area (EEA) Single Market for Construction Products, and burglaries, ANNEX I of that Directive described 6 'Essential Requirements', ANNEX I of these New Regulations now describe 7 'Basic Requirements for Construction Works', Built Environment, Bureaucrats at both European and national levels and always lacking a working familiarity with the full scope of EU Treaties, Client Organizations, Climate Change Adaptation, concepts explicitly referenced in ANNEX I such as the Safety of Rescue Teams (i.e. firefighters), Construction works must also be energy-efficient using as little energy as possible during their construction and dismantling, Council Directive of 21 December 1988 on the Approximation of Laws Regulations and Administrative Provisions of the Member States relating to Construction Products, Delegated Acts, durability of the construction works, Energy Performance of Buildings, EU, EuroCodes, European Technical Approvals (ETA's), european union, European Union (EU) Council Directive 89/106/EEC Interpretation, Fire Engineering Design, Fire Safety, fire-induced progressive collapse, Harmonized European Standards, how and when specific output from the obsolete interpretative framework of the Repealed Directive 89/106/EEC is revised and updated, human and social rights, if the full intent of these 'Basic Requirements for Construction Works' is properly transposed into the new interpretative framework of EU Regulation 305/2011, important cross linking concepts between Requirements e.g. Fire-Induced Progressive Building Collapse, In particular construction works must be designed and built taking into consideration accessibility and use for disabled persons, lighting, New Approach Directive, New EU Construction Product Regulation 305/2011 - Halleluiah !!, no proper infrastructure in any EU Member State to check and control CE Marks on industrial products generally, nor have an exceedingly high impact over their entire life cycle on the environmental quality or on the climate during their construction use and demolition, on the ground in Europe no such Single Market exists in reality, our current discussions about the 10th Anniversary of the 9-11 WTC Incident in New York, Politicians at both European and national levels and typically lacking a competence on technical issues, Proper Implementation has always been the fatal weakness of this 'system', re-use or recyclability of the construction works their materials and parts after demolition, Regulation (EU) No. 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down Harmonized Conditions for the Marketing of Construction Products and Repealing Council Directive, requirements which are appropriate to the needs of our time, safety of workers, so that Manufacturers can reap the enormous benefits of an effective EEA Single Market for Construction Products, Sustainability Implementation, Sustainable Human & Social Development, taking into account in particular the health and safety of persons involved throughout the life cycle of the works, The construction works must be designed built and demolished in such a way that the use of natural resources is sustainable, the emission of dangerous substances - volatile organic compounds (VOC's) - greenhouse gases - dangerous particles - into indoor or outdoor air, the full title of the now Repealed EU Directive 89/106/EEC was, the new EU Construction Product Regulation 305/2011, the release of dangerous substances into drinking water or substances which have an otherwise negative impact on drinking water, the release of dangerous substances into ground water - marine waters - surface waters - soil, to facilitate the construction works in satisfying all of the 6 Essential Requirements taken together as a whole, to have to explain basic information about CE Marking to Manufacturers, to have to pressure the TÜV Organization in Germany, to issue proper Test Reports to their German Clients, United Nations Convention on the Rights of Persons with Disabilities, use of environmentally compatible raw and secondary materials in the construction works, will we ever see the vital Infrastructure of Implementation operating successfully in the EU Member States

1 Comment to New EU Construction Product Regulation 305/2011 – Halleluiah !

1. 

   This website makes things hella easy.
Jolyn on September 30th, 2011

Leave a comment