Ar C.J. Walsh Technical Blog – Registered Architect, Fire Engineer & Independent Technical/Building Controller …… International Expert on Accessibility for All (including Fire Safety) + 'Real' Sustainability Implementation !
2014-11-05:ISO TC 92: ‘Fire Safety’ is a long-established Technical Committee within the International Standards Organization (ISO) … www.iso.org/iso/home/standards_development/list_of_iso_technical_committees/iso_technical_committee.htm?commid=50492 … and down through the many years of its existence, since 1958, it has laboriously constructed a robust foundation which has facilitated the modern evolution of Fire Science and Engineering and the development of many standard fire safety practices and procedures around the world.
BUT … and in spite the existence of ISO/IEC Guide 71: ‘Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities’ (a weak document which is badly in need of revision and updating !) …
Recently, having examined some draft standards being processed through ISO TC 92 … I have become very tired of the blatant incompetence … and lack of care and concern merging with feigned ignorance and/or stubborn resistance, within the Technical Committee, when it comes to the issue of ‘disability’ … in other words, the major matter of the real fire safety of vulnerable building users and occupants, i.e. people with activity limitations, in real buildings.
SO … a few days ago, I wrote the following e-mail message to a Working Group Chairperson (who shall remain nameless, because this same problem pervades the whole TC) …
.
Dear X,
With regard to All Aspects of the WG’s Work … one issue, in particular, sticks out like a sore thumb … how you treat ‘disability’. There is no clarity here, only confusion. There are no precise terms, only a garbled use of language and concepts.
Please allow me to suggest, with accompanying explanations, a suitable and necessary path forward.
I will circulate this e-mail message separately within ISO, and beyond.
Concerning Normative References … reference must be made to …
ISO 21542 (2011): ‘Building Construction – Accessibility & Usability of the Built Environment’
Within this document, Accessibility is understood to mean the full cycle of independent building use, in an equitable and dignified manner … and to include the approach, entry to and use of a building, egress during normal conditions and removal from the vicinity of the building … and, most importantly, evacuation during a fire incident to a ‘place of safety’ which is remote from the building.
Texts relating to ‘fire safety’ have been incorporated into the main body of this International Standard. It is, however, just a small beginning. Much work remains to be done.
Accessibility Design Criteria, as described in ISO 21542, must now be applied to the design and maintenance of all fire evacuation routes, fire safety related signage and fittings, etc., etc.
Use of the word escape, in any context, is strongly discouraged.
Concerning Terms & Definitions …
People with Activity Limitations: Those people, of all ages, who are unable to perform, independently and without aid, basic human activities or tasks – because of a health condition or physical/mental/cognitive/psychological impairment of a permanent or temporary nature.
Attached, please find the FireOx International ‘Fire Safety for All’ Matrix … which illustrates how the separate pieces, including ‘disability’, fit together.
Contraflow: Emergency access by firefighters or rescue teams into a building and towards a fire, while people are still moving away from the fire and evacuating the building.
Concerning Building User/Occupant Numbers & Provision … ‘token’ is not only entirely unacceptable, it is a clear case of professional negligence …
And why, suddenly, all of these ‘musts’ ??
Cogently mandated in the United Nations Convention on the Rights of Persons with Disabilities (CRPD) … the UN CRPD’s principal aim is to ensure that the Built, Social, Economic and Virtual Environments are sufficiently ‘accessible’ to permit a vulnerable and major population group in all of our societies to enjoy the fundamental freedoms and human rights set down in the Universal Declaration of Human Rights (1948).
The language of the Convention is always very robust and very direct: ‘States Parties shall …’
Also attached, please find a United Nations Global Map showing the status of Convention Ratification back in July 2014. At the time of writing this e-mail message, 151 Countries have ratified the UN CRPD.
Full and Effective Accessibility of the Built Environment is a human right. Adequate provision must be made for people with disabilities to use all buildings … not just some buildings … and certainly not just limited parts of a building !
In practice, people with disabilities must be included in all practice evacuation drills … and they must be included in all activities related to ‘fire safety’ and/or necessary to prepare for safe evacuation.
Furthermore … because Electronic, Information and Communication Technologies (EICT’s) now serve a function which is critical, during a fire incident, for the safety of all building users and firefighters, property protection, minimizing environmental damage, and sustainability … they must have a user interface which is Accessible for All … from both ends.
2014-10-17: Within the professional discipline of Fire Engineering … either a building is ‘fire safe’, or it is not. The Design Philosophy of the Fire Engineer is irrelevant. In fact, nearly everybody involved with fire safety in buildings would collapse in a fit of laughter at the delusional notion that a design philosophy was relevant. People’s lives are at stake !
Similarly, now, we must begin to think and act in the simple terms of a building either being ‘accessible’, or not. At stake, this time, is the quality of life and living for very many vulnerable people in all of our societies.
Accessibility for All, according to International Standard ISO 21542 (2011) … includes the approach, entry to and use of a building, egress during normal conditions and removal from the vicinity of the building … and, most importantly, evacuation during a fire incident to a ‘place of safety’ which is remote from the building.
Concerning that All above … FireOx International’s ‘Fire Safety for All’ Matrix shows who exactly we are talking about … and who must be considered in the development of a Fire Safety Strategy for every building … not just some buildings !
This is not just good design practice … it is also mandated in International Human Rights Law.
.
Colour image showing FireOx International’s ‘Fire Safety for All’ Matrix. Revised and Updated on 24 October 2014. FireOx International is the Fire Engineering Division of Sustainable Design International Ltd. (Ireland, Italy & Turkey). For a clearer and sharper print, download the PDF File below. Matrix developed by CJ Walsh. Latest revision suggested by Jo Kwan (Hong Kong).
Building Fire Safety Codes and Standards exist in almost every country. However – IF they exist at all – those guidelines relating to the Fire Safety of People with Activity Limitations are technically inadequate, entirely tokenistic and/or blatantly discriminatory.
It is time to Reboot this ridiculous, professionally negligent and obsolete old system … Reload with innovative and practical building design, construction, management and personal self-protection solutions … and Implement !
[ EICT’s = Electronic, Information & Communication Technologies ]
2014-10-13:Electronic, Information and Communication Technologies have rapidly become an essential feature of the Built, Social and Economic Environments; they are everywhere. During a fire incident, however, these e-Technologies serve a function which is critical for the safety of all building users and firefighters, property protection, minimizing environmental damage, and sustainability. They must, therefore, have a user interface which is Accessible for All … from both ends.
This is a requirement of International Law … and an unambiguous National Requirement (expressed in the form of law and/or mandatory administrative provisions) in those jurisdictions which are States Parties to the United Nations Convention on the Rights of Persons with Disabilities (CRPD).
There is no European Standard (EN) on e-Technology Accessibility … and, in the European Union (EU), a coherent approach to the accessibility of even a modest range of EICT’s has not yet even been developed.
.
Electronic, Information and Communication Technologies (EICT’s)must comply with Section 508 of the United States Rehabilitation Act Amendments of 1998 … or with a suitable Standard/Guidance Document of another country which details an equivalent level of e-Accessibility performance.
U.S. Section 508 covers the following range of e-Technologies:
Software Applications & Operating Systems (1194.21) ;
Web-based Intranet and Internet Information and Applications (1194.22) ;
2014-05-16: Anybody with even the slightest interest in the Future Development of Fire Engineering Design, and Structural Fire Engineering in particular, should pay attention to the proceedings of an upcoming CIB/NIST Workshop, which will be held on 21-22 May 2014, at the NIST Campus in Maryland, USA …
It is essential to read 3 White Papers … produced by three separate teams of experts, contracted by NIST, in advance of the Workshop … to get a ‘real’ flavour of how discussions may, or may not, develop next week. All three papers are available to download from the NIST WebSite (and the links below). I suggest that you get your hands on them … ASAP !
After reading these 3 NIST White Papers … I was not surprised by the large number of ‘unknowns’, or the enormous gaps in our ‘knowns’ …
Taken in whole and all together, however, the three documents are a public confirmation that today’s general practice of Fire Engineering is more akin to that of mid-19th Century Alchemy. Blinkered practitioners are isolated from the building design process … because they have no understanding of that process, and have no means of effective communication with the many other design disciplines involved. And minimal, i.e. ‘cost-effective'(?), compliance with the limited and inadequate fire safety objectives in current building codes/regulations is widely regarded as the one and only target for their efforts … a minor one compared to the fundamental, long-term target of realizing a Safe, Resilient and Sustainable Built Environment for All. At the same time, frontline fire service personnel are forced to operate on shoestring budgets … and, when a fire emergency inevitably occurs, they are regarded as nothing more than an expendable resource.
!! Structure … Does Not A Building Make !!
Some comments on the 3 NIST White Papers …
A. The Papers contain a number of important technical errors:
A similar Introduction in two of the Papers refers only to the 2005 NIST Report (NCSTAR 1) on the 9-11 Collapse of WTC Buildings 1 & 2 in New York City, which contained 30 Recommendations. However, NIST published a later Report in 2008 (NCSTAR 1A) on the Collapse of WTC Building 7, which contained a further 13 Recommendations … 1 new, and 12 revised/updated from the earlier 2005 Report.
There is a reference in one of the Papers to a 1989 European Directive on Construction Products (89/106/EEC), and as later amended. This Directive was repealed, in 2011, by Article 65 of the new European Union (EU) Regulation No.305/2011 on Construction Products. Unlike a Directive, a Regulation is addressed directly to the EU Member States, and does not permit any flexibility with regard to national implementation. Annex I of Regulation 305/2011 sets out 7 Basic Requirements for Construction Works:
– Mechanical resistance and stability ;
– Safety in case of fire ;
– Hygiene, health and the environment ;
– Safety and accessibility in use ;
– Protection against noise ;
– Energy economy and heat retention ;
– Sustainable use of natural resources.
Concerning fire safety in buildings … it is incorrect to state, or even suggest, that only the second Basic Requirement is relevant … a building must satisfy all of the Basic Requirements taken together, i.e. the 7 Basic Requirements are inter-dependent.
B. Having carefully read the Papers … none of the expert teams appear to have paid any attention to any of the NIST Recommendations, in either the 2005 or the 2008 Reports ! Note well that two separate series of posts on both sets of NIST Recommendations have been carried here on this Technical Blog.
C. If we have learned anything from the WTC 9-11 Building Collapses, it is that the Fire Engineer must be able to communicate effectively with other mainstream building design disciplines … especially ‘ambient’ structural engineers who speak the language of Structural Reliability, Limit State Design and Serviceability Limit States. The Fire Engineer must also become an active participant in the creative, trans-disciplinary process of design. These issues have not been seriously considered in any of the Papers.
D. All of the Papers lack a common and precise starting point … relevant structural fire engineering concepts are either not defined or badly defined … and the ‘dynamic, complex architectural interaction between a building’s structure and fabric under conditions of fire’ requires immediate and urgent investigation …
Structural Reliability
The ability of a structural system to fulfil its design purpose, for a specified time,
under the actual environmental conditions encountered in a building.
Structural Fire Engineering
Those aspects of fire engineering concerned with structural design for fire …
and the dynamic, complex architectural interaction between a building’s structure and
fabric, i.e. non-structure … under conditions of fire and its immediate aftermath,
including but not confined to the ‘cooling phase’.
Fire-Induced Progressive Damage
The sequential growth and intensification of structural deformation
and displacement, beyond fire engineering design parameters*, and the eventual failure
of elements of construction in a building – during a fire and the ‘cooling phase’
afterwards – which, if unchecked, will result in disproportionate damage,
and may lead to total building collapse.
[ *fire serviceability limit states ]
.
Disproportionate Damage
The failure of a building’s structural system:
(i) remote from the scene of an isolated overloading action ;
and (ii) to an extent which is not in reasonable proportion to that action.
[ Fire-Induced Progressive Damage and Disproportionate Damage are fundamental concepts in the Fire Engineering Design of All Buildings ! ]
.
E. It is not acknowledged in any of the Papers that the Fire Safety Objectives in Current Building Codes/Regulations are, of necessity, limited in scope … and entirely inadequate in the context of Annex I in EU Regulation 305/2011, and the long-term goal of realizing a Safe, Resilient and Sustainable Built Environment for All. Refer to the updated Scope, Aims & Objectives of CIB Working Commission 14: ‘Fire Safety’.
F. Once and for all … use of the term Fire Resistance (and any number of variations thereof, e.g. resistant, resisting, resistive, etc.) in connection with any aspect of structural performance in fire … is ridiculous ! It is roughly comparable to use of the term Fire Proof during the first half of the 20th Century.
G. Finally, for now … the current unwise focus on Crude Pass/Fail Results from the ‘standard fire’ testing of single loadbearing structural elements must evolve … must be transformed into the more detailed and precise measurement of all aspects of ‘real’ structural system performance over the full duration of a ‘design’ fire (including the cooling phase afterwards) … using a much wider range of performance monitoring equipment, e.g. short wave infra-red thermography.
.
It is no longer acceptable for Fire Engineering to exist in an isolated Twilight Zone … completely removed from the everyday realities of Mainstream Building & Construction.
2014-04-20:Traditional/Conventional Fire Engineering Practice is slowly, but inevitably, being transformed … in order to meet the regional and local challenges of rapid urbanization and climate change, the pressing need for a far more efficient and resilient building stock, and a growing social awareness that ‘sustainability’ demands much greater human creativity …
Design Target: A Safe, Resilient and Sustainable Built Environment for All
Essential Construction & Occupancy Start-Up Processes: Careful Monitoring & Reporting – Independent Verification of Performance (MRV)
.
Sustainable Fire Engineering Design Solutions:
Are Reliability-Based …
The design process is based on competence, practical experience, and an understanding of ‘real’ building performance and resilience during Extreme Man-Made Events, e.g. 2001 WTC 9-11 Attack & 2008 Mumbai Hive Attacks, and Hybrid Disasters, e.g. 2011 Fukushima Nuclear Incident … rather than theory alone.
Are Person-Centred …
‘Real’ people are placed at the centre of creative design endeavours and proper consideration is given to their responsible needs … their health, safety, welfare and security … in the Human Environment, which includes the social, built, economic and virtual environments.
Are Adapted to Local Context & Heritage* …
Geography, orientation, climate (including change, variability and severity swings), social need, culture, traditions, economy, building crafts and materials, etc., etc.
[* refer to the 2013 UNESCO Hangzhou Declaration]
In Sustainable Design … there are NO Universal Solutions !
Design Objectives:
To protect society, the best interests of the client/client organization and building user health and safety, and to maintain functionality under the dynamic, complex conditions of fire … Project-Specific Fire Engineering Design Objectives shall cover the following spectrum of issues …
Protection of the Health and Safety of All Building Users … including people with activity limitations (2001 WHO ICF), visitors to the building who will be unfamiliar with its layout, and contractors or product/service suppliers temporarily engaged in work or business transactions on site ;
Protection of Property from Loss or Damage … including the building, its contents, and adjoining or adjacent properties ;
Safety of Firefighters, Rescue Teams and Other Emergency Response Personnel ;
Ease and Reasonable Cost of ‘Effective’ Reconstruction, Refurbishment or Repair Works after a Fire ;
Sustainability of the Human Environment – including the fitness for intended use and life cycle costing of fire engineering related products, systems, etc … fixed, installed or otherwise incorporated in the building ;
Protection of the Natural Environment from Harm, i.e. adverse impacts.
.
More Specifically … with Regard to Resilient Building Performance during a Fire Incident and the ‘Cooling Phase’ after Fire Extinguishment:
1. The Building shall be designed to comply with the Recommendations in the 2005 & 2008 NIST(USA) Final Reports on the World Trade Center(WTC) 1, 2 & 7 Building Collapses.
In one major respect, the 2005 NIST Report is flawed, i.e. its treatment of ‘disability and building users with activity limitations is entirely inadequate. The Building shall, therefore, be designed to comply with International Standard ISO 21542: ‘Building Construction – Accessibility & Usability of the Built Environment’, which was published in December 2011.
2. The Building shall remain Serviceable, not just Structurally Stable(!) … until all buildings users (including those users with activity limitations waiting in ‘areas of rescue assistance’) have been evacuated/rescued to an accessible ‘place of safety’ which is remote from the building, and have been identified … and all firefighters, rescue teams and other emergency response personnel have been removed/rescued from the building and its vicinity.
The Building shall be designed to resist Fire-Induced Progressive Damage and Disproportionate Damage. These requirements shall apply to all building types, of any height.
Under no reasonably foreseeable circumstances shall the Building be permitted to collapse !
3. The Building shall be designed to comfortably accommodate and resist a Maximum Credible Fire Scenario and a Maximum Credible User Scenario.
.
Concerted International Research is Needed …
To creatively resolve the direct conflict which exists between Sustainable Building Design Strategies and Traditional/Conventional Fire Engineering.
An example … for cooling, heating and/or ventilation purposes in a sustainable building, it is necessary to take advantage of natural patterns of uninterrupted air movement in that building. On the other hand, fire consultants in private practice, and fire prevention officers in authorities having jurisdiction, will demand that building spaces be strictly compartmented in order to limit the spread of fire and smoke … thereby dramatically interfering with those natural patterns of air movement. The result is that the sustainability performance of the building is seriously compromised.
If, however, adequate independent technical control is absent on the site of a sustainable building … it is the fire safety and protection which will be seriously compromised !
To effectively deal with the fire safety problems (fatal, in the case of firefighters) which result from the installation of Innovative Building/Energy/EICT Systems and Products in Sustainable Buildings.
.
These are appropriate tasks for a new CIB W14 Research Working Group VI: ‘Sustainable Fire Engineering Design & Construction’ !
2013-07-11 (2021-08-04): Further to the Posts about the ongoing Fire Safety Fiasco at Priory Hall in Dublin, beginning on 2011-10-18 … and my recent reply to a question from Ms. Saffron Willetts, dated 2013-06-09 …
A house with a timber-framed party wall, whether the wall projects above the roof covering or not … in a terrace, or semi-detached … and constructed in 2004 (approaching the height of the Celtic Tiger frenzy in Ireland) ?? Not even torture in Guantánamo Bay (Cuba) by the Americans would persuade me to buy … or rent !
One last word of caution … carefully examine any ‘Opinion on Compliance’ covering this property.
.
On Sunday evening last, 7 July 2013, I received an e-mail notification from Mr. Del Tillyer about a Belmayne ‘Fire Safety’ Press Conference to be held in his home … 19 Churchwell Place, Belmayne, Dublin 13 … on Tuesday, 9 July 2013, at 11.00 hrs. I was very pleased to attend.
.
Colour photograph showing the attractive Belmayne Residential Development in Dublin, Ireland. Taken by CJ Walsh. 2013-07-09. Click to enlarge.
.
Back in ‘ye good olde days’ of the Celtic Tiger … the price paid for this 2 Storey Timber-Framed Dwelling Unit was a staggering € 530,000 ! However, following occupation of their new home, it was noticed by the family that there were BIG problems concerning nuisance sound transmission from neighbouring units. And that’s when their long shabby saga of ‘Fire Safety at Belmayne’ began … or, more correctly, it should be called the tortuous saga of a ‘Serious Lack of Fire Safety at Belmayne’ !!
.
Colour photograph showing 19 Churchwell Place, Belmayne, Dublin 13. Taken by CJ Walsh. 2013-07-09. Click to enlarge.
.
In order to satisfy the Legal Requirements of Part D: ‘Materials and Workmanship’, Second Schedule to the Irish Building Regulations … this form of innovative construction was covered by an Irish Agrément Board Certificate …
Click the Link Above to read and/or download PDF File (1.43 MB)
.
Unfortunately … any connection between IAB Certificate 04/0198 and the bitterly cold reality of how 19 Churchwell Place was actually constructed … is, at best, extremely tenuous … as the following photographs clearly show …
.
Photograph taken by CJ Walsh. 2013-07-09. Click to enlarge.Photograph taken by CJ Walsh. 2013-07-09. Click to enlarge.
[ It was difficult … but I resisted the temptation to add an elaborate caption to each image which would describe the original Shoddy, Careless, Incompetent Site Workmanship ! And please bear in mind that the opening-up shown was limited … more problems cannot be seen, or will only become apparent in the future, e.g. the inevitable settlement of low-density thermal insulation !! ]
.
Photograph taken by CJ Walsh. 2013-07-09. Click to enlarge.Photograph taken by CJ Walsh. 2013-07-09. Click to enlarge.
.
[ This is the other unreported and completely hidden Irish National Debt … over 20 years of ‘Lite’ National Regulation of the Construction Sector and an Entirely Inadequate and Ineffective National System of Local Authority Building Control / Independent Site Technical Control have resulted in a New National Building Stock which will require an enormous amount of difficult and costly repairs during the next decades … which will have to be paid for by the citizen ! Those responsible … National Authorities Having Jurisdiction (AHJ’s), Professional Institutes and Societies, Property Developers, Construction Product Manufacturers, and Politicians … have all quietly slipped away from the crime scene !! ]
.
Photograph taken by CJ Walsh. 2013-07-09. Click to enlarge.Photograph taken by CJ Walsh. 2013-07-09. Click to enlarge.
.
The Fire Consultant on this Repair Project was Mr. Noel C. Manning, R.I.P.
.
.
Explanatory Note:
In the event of a fire incident at this dwelling unit … why are the construction failures shown in the photographs above so risky, so hazardous, so dangerous for its occupants (more precisely – their health, safety and welfare) ??
Even within the Construction Sector, it is not well understood that the Fire Safety Objectives of Building Regulations, generally and not just in Ireland, are limited in scope to the protection of people who use and/or occupy buildings from fire (i.e. heat, smoke and flame). These Fire Safety Objectives only ‘extend’ to the protection of property (i.e. the building fabric) … insofar as the protection of that property is relevant to the protection, including the safe evacuation, of people in the building.
The biggest original construction failure shown above is that there is an extensive warren of continuous, hidden cavities within the walls, floors, service duct and ceilings of the house … which facilitates the unseen spread of fire, including toxic smoke, very rapidly throughout the building and to adjoining dwelling units. This type of insidious fire spread cannot be detected by smoke alarms located in the area of a staircase.
The serious ‘cavity’ failure is compounded by another serious construction failure … the weak and inadequate protection from fire (i.e. heat, smoke and flame) to the staircase itself … which is the only means of evacuation from the house for the occupants.
2013-06-08: Looking forward to some serious, collaborative and multi-disciplinary discussions on the day … and a barrel of laughs in the process (!!) …
The NUIG ‘blurb’ for the day states … “Considering the importance of aggressive energy-efficiency measures in the Building Sector, together with the requirements for a safe, healthy, comfortable (and accessible) Built Environment … this NUIG Workshop will explore the topic of Integrated Modelling and Performance of the Built Environment.”
.
I was very pleased to receive an invitation to make a Presentation at this prestigious event …
‘Sustainable Fire Engineering Design’ – My Presentation Abstract
Fire Engineering … involves much more than mere compliance with building regulations and codes … whose fire safety objectives are limited, and whose performance requirements are sometimes inadequate and always minimal. More problematically … a fundamental conflict is mushrooming between Safe Sustainable Climate Resilient Building Design and Conventional Fire Consultancy Practice.
However … Sustainable Fire Engineering Design Solutions are:
Reliability-based ;
Person-centred ;
… and above all …
Adapted to Local Context and Heritage (fr: le Patrimoine – see ICOMOS 2011) … geography, climate (incl. change, variability and severity swings), social need, culture, and economy, etc., etc.
This Presentation will discuss very rich collaborative research potential in the following areas …
Creative Fire Engineering Concepts and Building Systems
Fire-Induced Progressive Damage in Buildings
Human Behaviour and Abilities in a Fire Situation
Building Design for Firefighter Safety
BMS – Fire Modelling – BIM
Research Output must be targeted at practical implementation in ‘real’ buildings … with actual user/construction performance carefully (i.e. reliably and precisely) monitored !
.
If anybody out there is interested in attending this NUIG Research Workshop … please contact Ms. Magdalena Hajdukiewicz (IRUSE) at: hajdukiewicz1@nuigalway.ie
.
.
POST-EVENT UPDATE: 2013-06-27 …
While it was difficult to keep the Workshop Programme, involving a series of short 10-minute presentation slots, on track … discussions during the day were engaging, energetic and extensive.
I happily look forward to a successful and collaborative outcome from the day … Multi-Disciplinary Teams producing Trans-Disciplinary Research Output … which is geared towards practical implementation in ‘real’ buildings, with actual construction and building user performance carefully (i.e. reliably and precisely) monitored !
Click the Link Above to read and/or download PDF File (193 Kb)
Colour photograph showing the venue for the IRUSE & The Ryan Institute (Galway University – NUIG) Built Environment Research Networking Workshop, which was held in the New Engineering Building on 24 June 2013. Seen here is Dr. Harald Berresheim during his presentation on ‘The Self-Cleansing Capacity of Our Atmosphere – Limitations on Local to Global Scales’. Photograph taken by CJ Walsh. 2013-06-24. Click to enlarge.
Click the Link Above to read and/or download PDF File (1.78 MB)
.
However … and especially since the Workshop had been organized by IRUSE (the ‘SE’ standing for ‘Sustainable Engineering’) … it was indeed very strange to have to clarify the following points, among others:
1. The Minimum Life Cycle for a Sustainable Building is 100 Years … not 50 or 60 years !
2.Future Research Collaboration should be targeted at the multi-aspect ‘Sustainability Agenda’. The word ‘green’ (where only environmental aspects of sustainability are considered) should be actively discouraged, if not banned entirely !
3. With regard to Good Indoor Air Quality (IAQ) … two high-level performance indicators which have been developed with the aim of protecting human health, and are both now referenced in International Standard ISO 21542: ‘Building Construction – Accessibility & Usability of the Built Environment’ … are …
– Radon Activity (incl. Rn-222, Rn-220, RnD) in a building should, on average, fall within the range of 10 Bq/m3 to 40 Bq/m3, but should at no time exceed 60 Bq/m3 ;
– Carbon Dioxide (CO2) Concentrations in a building should not significantly exceed average external levels – typically within the range of 300 parts per million (ppm) to 500 ppm – and should at no time exceed 800 ppm.
Concerning the substantive difference in meaning and scope between ‘sustainable’ and ‘green’ … there is, perhaps, no better way to illustrate this difference than to observe the atrocious ‘Accessibility-for-All’ Performance (Accessibility for People with Activity Limitations !) of the critically acclaimed (?!?) and award winning (?!?) New Engineering Building in Galway University … which flaunts its ‘über-green’ credentials …
Can you believe what’s in those photographs ?? More importantly … can you believe what’s not in those photographs ???? In such a recently completed building … “incredible” is the only answer to both questions.
.
Under International Law … lack of accessibility, or inadequate accessibility, to the social, built, virtual and economic environments … IS a denial and infringement of the basic human rights of people with activity limitations. It also limits, needlessly and unnecessarily, the numbers of potential users of those environments … which makes no sense at all.
My strong recommendation to Galway University … is to immediately commission a Competent Accessibility Consultant to give the university campus a thorough going over ! You are failing the campus user population … the local community in Galway … and Irish society generally.
My even stronger recommendation to the Architects for the New Engineering Building … RMJM Architects (Robert Matthew Johnson-Marshall) in Scotland, and Taylor Architects in Ireland … is to always commission a Competent Accessibility Consultant on all of your projects … small, medium and large … because you haven’t a bull’s notion about this important dimension of building performance !!
And remember folks … Accessibility has been clearly specified in the new International Standard ISO 21542 as including … ‘access to buildings, circulation within buildings and their use, egress from buildings in the normal course of events, and evacuation in the event of an emergency’.
2013-05-30: Further to the recent post here, dated 2013-04-02 … and this Page on our Corporate WebSite …
Pausing … and stepping back … to consider conventional architectural practice, how architects are educated, and whether or not the professional institutes are helping, or handicapping, the forward progress of Architecture for a Better, More Sustainable World … I am deeply concerned about the future …
1. Should it be ‘Multi-Disciplinary’ or ‘Trans-Disciplinary’ ?
The word ‘trans-disciplinary’ is confusing to a lot of people … surprisingly, to many at senior levels in construction-related industries, research sectors, and academia … not just in Ireland, but internationally. The more senior the level, it seems the higher are the walls of that proverbial ‘box’. But, let me reassure you, thinking outside the ‘box’ is not confined to people in their early 20’s !!
Looking over just the initial list of Consultant Specialists in a complex architectural project … it is the task of the Architect to transform a widely ‘multi-disciplinary’ input into a coherent ‘trans-disciplinary’ output. These two concepts are very different.
Next Generation Architectural Processes and Procedures are urgently required …
.
2. EU Climate & Energy Policies – Key Driving Forces for Sustainability !
Recently, the European Commission issued this Green Paper … (which, by the way, has absolutely nothing to say about Climate Change Adaptation !) …
Click to enlarge.
European Commission COM(2013) 169 final – Brussels, 2013-03-27
Click the Link Above to read and/or download PDF File (104 Kb)
.
Concerning this Green Paper … Two Important Points …
(i) Current European Union (EU) Climate and Energy Policies are not just a passing fad … they are here to stay. With certainty, we also know that they will become more and more stringent … and that higher levels of performance will be mandated … not just on paper or a computer printout … but in reality, for example, in buildings which are constructed and actually occupied by ‘real’ building users. Refer also to recent findings, in Europe, about the large and growing discrepancy between car fuel efficiencies claimed after testing in a laboratory, and when later monitored under ‘real’ driving conditions.
(ii) It has now become obvious that the European Commission has lost the plot … big time ! Policies and Actions in closely related fields have been permitted to become fragmented, disjointed, and even counter-productive. Written into the EU treaties is the term ‘sustainable development’ … an intricate, open, dynamic and continuously evolving concept. However, senior levels (both political and bureaucratic) in the different Directorates-General of the European Commission have long ago forgotten, mislaid and/or lost the proper meaning of ‘sustainability’ … and the essential interdependency of its many aspects.
.
… which brings me to the urgent necessity for Next Generation Architectural Design Concepts …
.
In Europe … the 1990’s and early 2000’s, taken together, was a period of construction experimentation and research. We thought we could afford the resources and the lazy times … to try this, that and the other. Little emphasis was placed on practical implementation in ‘real’ buildings. However, the scale and immediacy of today’s Sustainable Development Challenges in the Built Environment have, within a few short years and much more quickly than expected, become unprecedented.
The Yanks (Gringos) are very strong on marketing … much stronger than Europe … so let’s examine a small model building … and see if its Architectural Design Concept is both coherent and comprehensive …
Mr. Amory Lovins, of the Rocky Mountain Institute in the USA ( www.rmi.org ) … has produced a very snazzy Visitor’s Guide to the sprawling complex that is ‘his home, bioshelter and office’ in Snowmass, Colorado … a Guide intended for wide public circulation.
Concerning this Building … Three Points of Interest(?) …
(i) For a fleeting moment … let us imagine that a percentage – not even all – of the vast populations living in Africa, India and China wanted the same sort of lifestyle, including the house, that Amory Lovins possesses. What would be the resource implications for this planet ??
Click to enlarge.
(ii) In a first construction ‘try’ … separate solar and/or photovoltaic panels fixed in place on a roof … attached to the building, almost as an afterthought … were the norm. Now, however, these building systems are no longer innovative … they must be properly shown to be ‘fit for their intended use’ (to comply with building regulations and codes) … and they should now be fully integrated into the architectural design concept for the building … which is not the case in the photograph above. [ Car manufacturers face a similar design challenge today … how to successfully integrate new technologies, e.g. satellite navigation screens, smartphone docking stations, usb sockets, bluetooth, etc., etc., into the front dashboard.]
Anyway … how reproducible is this model building in urban and suburban contexts … in the USA … or elsewhere in the world ?? How many people would have access to sufficient land outside a building to ‘plant’ one, or a series of photovoltaic panels ? Tracking photovoltaic panels, as shown above ?? And as seen in Italy, with those ridiculous photovoltaic fields (in a post, dated 2011-11-07 ) … good agricultural lands should not be used for this purpose … not now, not ever, never !
Photograph taken by Judy Hill Lovins. Click to enlarge.
(iii) Sustainable Buildings are ‘high-tech’ … and a very large amount and variety of electronic and mechanical equipment is necessary in order to reliably monitor and tightly control their performance … in other words, to operate a building in accordance with its design specification. Again … these services should be fully integrated into the architectural design concept for what is, no longer, just a simple dwelling. Do similar houses without basements, for example, now need a central well-ventilated service room, complete with compact workstation ?
Photograph taken by Judy Hill Lovins. Click to enlarge.
In my opinion … the Architectural Design Concept for this building is not coherent. The overall architectural impression is one of a large sprawling house, on a very large plot of land … with many different ‘environmental/energy’-related appendages, or add-ons. Can you see any coherence ?
It is the task of the Architect to consider all facets of building performance at the earliest stages of design … whether a small building, or a very large complex building … and to integrate those many diverse, but interdependent, facets into a coherent architectural statement … having a conceptual single crystalline shape … while also bearing in mind ‘person-centredness’, ‘flexibility’, ‘adaptability’, ‘accessibility for all’, and a ‘long and useful life cycle’.
[ An aside … closer to home … we are now witnessing the rise of the ‘Passive House Designer’. This person, who is able to use a specific computer software package … no less, and no more … need not necessarily be an architect, or have any architectural education/training. Is it possible to refer to the realized output from this software as ‘architecture’ … or are they merely drab, boring boxes ?? ]
.
3. Sustainable Buildings, Fire Safety & Fire Engineering ?
In the elaborate Amory Lovins Visitor’s Guide above … there is only one mention of fire hazard in the building … and that is in relation to a Passive Clothes Dryer (Page 40). End of story with regard to the Fire Safety Issues for its Users … and the Fire Engineering Implications arising from a chosen architectural design and chosen construction materials and methods.
When I was referring to a centrally located service room in # 2(iii) above … that room should also be structurally hardened, and fire and smoke ‘separated’ from other spaces in the house. Or … if the service equipment is located in a roof space, there are implications for roof structural reliability in a fire situation, and the fire resistance of the ceiling construction beneath. Or … if the equipment is located in a basement, a simple intermediate timber floor construction overhead is inadequate.
Furthermore … an intelligent fire detection and warning system … and a suitable domestic fire suppression system … are no longer luxuries or optional extras, but essential requirements ! Who would want to lose such a valuable investment ??
And insofar as fire safety issues are not being considered … it seems, at all … in the case of most ‘high-tech’, sustainable buildings … and certainly not in the case of the Lovins House … the Architectural Design Concepts for these buildings ‘suffer’ from a gaping hole … an enormous void … they are incomplete and, therefore, entirely inadequate.
Fire Engineering involves much, much more than mere compliance with building regulations and codes … whose fire safety objectives are limited, and whose performance requirements are sometimes inadequate and always minimal.
.
Unfortunately … there is a fundamental conflict between Sustainable Building Design Strategies and the current state-of-the-art in Fire Engineering Design. As an example … for cooling, heating and/or ventilation purposes in a sustainable building, it is necessary to take advantage of natural patterns of air movement in that building. On the other hand, fire consultants in private practice, and fire prevention officers in Authorities Having Jurisdiction (AHJ’s), will demand that building spaces be strictly compartmented in order to limit the spread of fire and smoke … thereby dramatically interfering with those natural patterns of air movement.
In everyday practice, there is a vast chasm in understanding and communication between these two very different design disciplines. As a result, serious compromises are being enforced on Sustainability Performance. If, on the other hand, adequate independent technical control is absent on the site of a Sustainable Building … it is the fire safety and protection which is being seriously compromised.
A range of critical fire safety issues (fatal, in the case of firefighters) are also arising from the Innovative Building Products and Systems being installed in Sustainable Buildings.
And because the emphasis is on pre-construction design ‘intent’ rather than the ‘real’ performance of the completed and occupied building … all of these problems are being conveniently sidestepped or ignored … and they remain hidden from everybody’s view.
.
Sustainable Fire Engineering Design, on the other hand, is the creative response to Sustainable Design … and the powerful drivers of Climate Change Adaptation, and Energy Conservation/Efficiency in Buildings.
Sustainable Fire Engineering Design Solutions are …
Adapted to Local Conditions … Geography, Climate (change, variability and severity swings), Social Need, Culture, and Economy, etc., etc ;
‘Reliability-Based’ … the design process is based on competence, practical experience, and an examination of ‘real’ extreme events, e.g. 2001 WTC 9-11 & 2008 Mumbai Attacks, and 2011 Fukushima Nuclear Incident … rather than on theory alone ;
‘Person-Centred’ … ‘real’ people are placed at the centre of creative endeavours and proper consideration is given to their responsible needs … and their health, safety and welfare … and security … in the Human Environment.
Sustainability … continues to fundamentally transform our Fire Engineering, Architectural and Consultancy Practice at Sustainable Design International Ltd (SDI) !
2012-12-14 & 2012-12-30: Further to this distressing incident … which exposed a profound lack of awareness, care and competence within the general fire safety industrial sector …
… this is how we would like to help you … whether you are an individual, or an organization … whether you are located in Ireland, Italy or Turkey … some other part of Europe, the Arab Gulf Region, India, Japan, China … or wherever !
And … we can, if requested or necessary, work in collaboration with local partners in those different geographical regions.
– FireOx International is the Fire Engineering Division of Sustainable Design International Ltd. (SDI) –
.
Colour photograph showing the 2 World Trade Center Towers, in New York City, immediately after the second plane impact. The mechanical damage arising from such a plane impact had been considered in the Initial Building Design Process; incredibly, any type of Fire Incident had not ! In the case of both towers and within a short period of time, Fire-Induced Progressive Damage resulted in Disproportionate Damage, and eventual Total Building Collapse. The horror and carnage at the World Trade Center Complex also caused enormous long-term damage to the economy of Manhattan … and had a very significant adverse impact on Global Financial Markets. Click to enlarge.
.
Introduction
Fundamentally, the 9-11 World Trade Center Incident in New York (2001) was an Extreme ‘Real’ Fire Event. It presented the International Fire Engineering Community with a catastrophic failure in conventional practices and procedures related to:
Fire Engineering, Structural Engineering, and Architectural Design ;
Human Building Management Systems ;
Emergency Response by Firefighters, Rescue Teams, and Medical Personnel ;
National and Local Organizations Having Authority or Jurisdiction (AHJ’s) ;
… and with the serious problem of entirely inadequate Fire Safety Objectives in the building legislation, model codes and design standards of the most economically advanced countries in the world.
Those people who understand the building design process, and have experience as construction practitioners, have long realised that the lessons from 9-11 must be applied across the full spectrum of building types … not just to tall buildings. Right up to the present day, unfortunately, many people in the International Fire Engineering Community are either unwilling, or unable, to do this.
Furthermore … Fire Engineering, Architectural Design and Structural Engineering must, of urgent necessity, be seamlessly conjoined … with the aim of removing misunderstandings and the wide gaps in client service delivery between the different disciplines.
In 2002, a series of Long-Term 9-11 Survivor Health Studies commenced in the USA … and in 2005 and 2008, the U.S. National Institute of Standards and Technology (NIST) issued a series of Post 9-11 Critical Recommendations concerning the design, construction, management and operation of buildings.
At FireOx International … we have fully integrated this essential design guidance into our frontline fire engineering and architectural practice … we have developed unique and practical solutions for worldwide application, some of which appear in International Standard ISO 21542: ‘Building Construction – Accessibility & Usability of the Built Environment’, published in December 2011.
.
Colour photograph showing an armed assailant during the November 2008 ‘Hive-Attack’ on Mumbai … an extraordinarily violent, co-ordinated assault on the largest (and wealthiest) city in India, which involved the strategic targeting of built environment Places of Public Resort, Iconic Buildings, High-Rise Buildings, Buildings having a Critical Function, Transport Infrastructure and Service Utilities … with the aim of causing widespread terror among the general population, including tourists, and disruption to the city’s important economic environment. Click to enlarge.
.
FireOx International’s Commitment to You
As a necessary response to the New 21st Century Paradigm of Real Extreme Event in a Built Environment which is becoming more and more complex … is subject to climate change and severe weather events … and is vulnerable to malign and malevolent disruption –
WE are committed to … the implementation of a Sustainable Human Environment which is Fire Safe and Secure for All, meaning that an ‘appropriate project-specific fire safety level’ is our fire engineering objective, with ‘human health protection’ targeted as a priority … through the use of innovative, reliability-based and person-centred sustainable design practices and procedures.
.
What is an ‘Appropriate Fire Safety Level’ in Your Building or Facility ?
It is rarely, if ever, explained to clients/client organizations that the Minimal Fire Safety Objectives in building legislation are focused solely on protecting the ‘interests’ of society, not those of the individual … are, quite often, inadequate and/or flawed … and are, always, revised only after the latest tragedy !
To properly protect Your Interests as a client/client organization … we strongly advise that the Appropriate Level of Fire Safety in Your Building or Facility should exceed the minimal level of safety required by building legislation. We would also caution that, in many jurisdictions (e.g. India), compliance with national building legislation is voluntary.
Which raises the issues of whether or not you will actually get what you pay for, and whether or not the Fire Protection Measures in Your Building or Facility are reliable (in other words, will they perform as intended at the time of a ‘real’ fire, which may occur at any time in a building’s long life cycle) !?! Competent Technical Control of Design and Construction, independent of the design and construction organization(s), is essential.
You should carefully consider the following spectrum of issues which may be directly relevant to Your Project. Following a process of consultation with you, we then develop Project-Specific Fire Engineering Design Objectives … bearing in mind that you must also comply with safety at work, anti-discrimination, and environmental legislation, etc … maintain business continuity, etc … be energy efficient, etc … and be socially responsible, etc …
– Protection of the Health of All Building Users … including People with Activity Limitations (2001 WHO ICF), Visitors to the building or facility who may be unfamiliar with its layout, and Contractors or Product/Service Suppliers temporarily engaged in work or business transactions on site ;
– Protection of Property from Loss or Damage … including the Building or Facility, its Contents, and Adjoining or Adjacent Properties ;
– Safety of Firefighters, Rescue Teams and Other Emergency Response Personnel ;
– Ease and Reasonable Cost of ‘Effective’ Reconstruction, Refurbishment or Repair Works after a Fire ;
– Sustainability of the Human Environment (social – built – virtual – economic) … including Fitness for Intended Use and Life Cycle Costing of fire engineering related products and systems, etc … fixed, installed or otherwise incorporated in the building or facility ;
– Protection of the Natural Environment from Harm, i.e. Adverse or Damaging Impacts.
.
FireOx International – Our Fire Engineering Services
WE will advise you on Fire Safety Policy, Fire Safety Strategy Development, Fire Safety Implementation … and, whether you are within or from outside the European Union, on CE Marking of Fire Protection Related Construction Products ;
WE understand the process of Design, particularly the new language of Sustainable Design … and we will produce Creative Fire Engineering Solutions for Your Project ;
WE are thoroughly familiar with the intricacies of Building Sites … and we will verify and/or validate Design Compliance during construction, and at project completion … and, if requested or necessary, as a completely Independent Technical Controller ;
WE communicate easily and effectively with other Professional Design Disciplines, including architects and structural engineers … and we will act as fully participating members of Your Project Design & Construction Team … and, if requested or necessary, as the Design Professional in Responsible Charge** ;
Are adapted to Local Geography, Climate/Climate Change, Social Need, Culture, Economy … and Severe Events (e.g. earthquakes, flooding) ;
Are ‘Reliability-Based’, i.e. that design process based on practical experience, competence and an examination of real extreme events, e.g. 2001 WTC 9-11 & 2008 Mumbai Attacks, and 2011 Fukushima Nuclear Incident … rather than theory alone ;
Are ‘Person-Centred’, i.e. that design process which places ‘real’ people at the centre of creative endeavours and gives due consideration to their responsible needs, and their health, safety, welfare and security in the Human Environment.
It is there, not here, that we define Sustainable Human & Social Development … and describe how our Practice is responding to this open, intricate, dynamic, and still evolving concept. The resulting transformation in how frontline services are provided to our Clients/Client Organizations ensures a much more comfortable ‘fit’ to their needs … and a greater level of protection, safety and security for society !
.
[** 2005 NIST(USA) Final Report on 9-11 World Trade Center 1 & 2 Tower Collapses
– Footnote 49 –
… the Design Professional in Responsible Charge – usually the lead architect – ensures that the (Design) Team Members use consistent design data and assumptions, co-ordinates overlapping specifications, and serves as the liaison with enforcement and review officials, and with the client or client organization. ]
